VINCENT RC-572 Manuel D'utilisation page 51

Restore the pre-programming
At any time you can recover the device control functions for all devices
this remote control comes pre-programmed with. All other devices that
have been added by the user will not be deleted in the process.
To restore the exact factory pre-programming you have to delete all devi-
ce keys on all HOME pages before executing the described actions (see
section "Setting up the remote control for your devices").
1. On the HOME page type the fol-
lowing key sequence MENU, SET-
TING, PRE-LOAD and PRE-SET.
2. Now choose ALL. In the display
appears "Processing... Please
wait for a few minutes". Anyway,
a few seconds later the process
of loading from the database
should be finished.
Vincent
51