VINCENT RC-572 Manuel D'utilisation page 52

Settings of the LC display
Vincent
52
1. On the HOME page touch
MENU, then SETTING, followed
by DISPLAY.
2. Brightness: Keep the slider "IN-
TENSITY" touched and move it to
the right (increase brightness of the
backlight) or the left (decrease
brightness of the backlight).
Release the slider when the desired
setting has been reached.
3. Backlight behaviour: Touch one of
the two areas in the middle of the
screen to set the behaviour of the
backlight. When Active at anyti-
me is chosen, the backlight is al-
ways activated for some seconds
after the display gets touched. The
alternative option Active in dark
room makes the display backlight
available only for environments
where the sensor (2) measures low
light intensity.
4. Contrast: Keep the slider "LCD
CONTRAST" touched and move
it to the right (increase contrast of
the display) or the left (decrease
brightness of the display).
Release the slider when the desi-
red setting has been reached.
5. To save the setting finally press
SAVE or return to the main page
without changes using .