Viega 2889-6US Directives Du Produit

Product Instructions
Viega Compact Decoiler
Model 2889-6US
1 2
EN
Viega Compact Decoiler
Viega products are designed to be
installed by licensed and trained plumbing
and mechanical professionals who are
familiar with Viega products and their installation.
Installation by non-professionals may void
Viega LLC's warranty.
1
Open all four retracting legs of the base stand on
a flat surface with the base shaft pointing upward.
2
Place the tubing guide arm onto the base shaft
with the guide arm pointing upward.
3
Slide the coil carousel (with the 4 retracting arms
pointed up and together) onto the base shaft with
the arms pointing upward. Once the carousel is
seated completely on the base shaft, lower the
arms down into the open position.
CAUTION!
Arms can fall down during this step and
may cause injury.
Viega LLC
585 Interlocken Blvd.
Broomfield, CO 80021
Phone (800) 976-9819
www.viega.us
3 4
4
Insert the bolts of the coil I.D. support arms into
each of the four holes supplied in the coil carousel
arms. Use the four wingnuts that are zip tied to
the retaining arms to attach them securely.
5
Place tubing coil around support arms. Slide the
square end of the coil retaining arms onto the coil
I.D. supports pointing outward. These arms rest on
top of the coil during the installation of the tubing.
Tubing Size (in) Coil Length (ft)
5/16
5/16
⅜
⅜
½
½
½
½
½
½
⅝
¾
¾
¾
EN
Product Instructions
Viega Compact Decoiler
This document is subject to updates. For the most current Viega
technical literature please visit www.viega.us.
ES
Instrucciones del Producto
Desenrollador compacto
Este documento está sujeto a actualizaciones. Para consultar la más
reciente literatura técnica de Viega visitar www.viega.mx.
FR
Directives du Produit
Dérouleur compact
Ce document est soumis à des mises à jour. Pour consulter les
manuels techniques Viega les plus récents, consultez notre site
www.viega.ca.
5
250
1000
300
1200
250
300
400
500
1000
1200
500
150
300
500
PI-HC 561131 1119 Compact Decoiler (EN ES FR)