Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE: Changing the weight of the trailer and/or tow vehicle by adding, moving or unloading
cargo may require the need to adjust how the weight distribution system is set up.
IMPORTANT! Set parking brake of tow vehicle and chock
the wheels of the trailer before lifting or lowering!
1. Line up the tow vehicle and trailer on level pavement, in a straight position.
2. Use the trailer tongue jack to level the trailer. Measure the distance from pavement to the inside of
the coupler socket, and record here:
3. Mark a spot on the side of the frame on the trailer as close to the coupler as you can, measure from
this mark to the ground/pavement, and record here:
later to determine if a proper setup has been achieved.
All Products limited to Vehicle Tow Rating; see Vehicle Owners Manual. April 06, 2017
See
www.huskytow.com
Measure Trailer Coupler & Frame Height
for Warranty Information/Tech Support. © (2017) DTS. Mfg.
.
5
Page
. This measurement will be used
Publicité
Table des Matières
