Gewiss JOINON WALLBOX I-CON PREMIUM Manuel D'utilisation Et D'installation page 71

STATUS INDICATORS
11.
The charging station uses RGB LEDs and the display to inform the client about the status and indicate which
actions need to be carried out. The status indication (READY, CHARGING, ERROR) is also provided in the "I-CON
MANAGER" APP (if it is near the charging station and the devices are connected with each other).
The meanings of the various colours are explained below.
Colour and status
Fixed green
Flashing green
Fixed blue
Flashing blue
Fixed red
Flashing red
Flashing white
None
CHARGING PROCESS
12.
The various operating modes of the premium I-CON premium charging station involve a different approach to the
charging process.
An explanation is provided below of how the charging process changes according to the operating mode.
12.1 DLM AUTOSTART OPERATING MODE
12.1.1 VEHICLE CHARGE IN ECO MODE
As indicated in chapter 9, the ECO mode is set by default.
In order to customise the charging mode, the "I-CON MANAGER" APP must be used or access the graphic inter-
face in order to:
1. Select a charging range to be used
2. Set a time range for vehicle charging
It is necessary to set a time range for charging.
DISPLAY
Display
LED
Description
The station is ready to start a charging session. No problem detected.
The recharging station is waiting for the vehicle to be connected or disconnected.
The charging session is in progress and the vehicle is absorbing energy.
The charging session is in progress, but the vehicle is not absorbing energy (battery charged, or
vehicle not ready for recharging).
An internal error has been detected by the station, and the charging process cannot be
continued.
The station has gone into RFID card deletion mode, to delete the cards from the local White List.
The station displays the secret menu.
The station has gone into RFID card acquisition mode, to save the cards in the local White List.
The charging station does not have the necessary power supply.
71