LENCO SCD-580SI Guide D'utilisation page 8

Masquer les pouces Voir aussi pour SCD-580SI:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Preset stations
You can store up to 20 radio stations in the memory
Set to tuner mode.
1. Turn to the desired radio station by "Manual" or "Auto" tuning method.
2. Press the Mem/Clk-Adj button (4) once and the "MEMORY" indicator and preset station number is flashing
on the LCD display (6).
3. Press Folder/Pre-up/down button (15) to select the desired station memory for storage.
4. Press Mem/Clk-Adj button (4) again to confirm the setting.
5. Repeat step 1 to 4 to store other stations.
6. Now you can select the presets stations in order by pressing the Folder/Pre–up/down button (15)
Please Note:
The presets will not be remembered when the mains power is disconnected and no batteries are inserted. It's
best to keep the mains connected all the time.
When storing a preset, the program mode will discard any changes and return to normal mode automatically
after 10 seconds. (When the preset is not stored by pressing Mem/Clk-Adj (4) within that time).
 You can overwrite a present station by storing another frequency in its place.
FM-Stereo reception
Press the St/Mono button (7) repeatedly, to switch between forced MONO or AUTO mode. In particular when
stereo signals are weak, it is preferable to receive the program in Mono.
The default FM mode is configured as AUTO, so when the Radio stations are received in stereo, the stereo
indicator "
" will be shown on the LCD display (6).
Hints for best reception:-
The radio is equipped with a telescopic antenna (20). Fully extend the antenna and rotate the antenna to a position with the
best reception.
Playing Compact Disc
Getting start
1. Press Function button (13) to select "CD" mode.
2. Press the top right corner of the cd door to open.
3. Insert a CD with the label facing up and close the cd door.
4. The CD content will be read and the LCD display (6) will show the total number of tracks and the total
playtime. Playback will start automatically.
5. Press the volume button (16) until the desired volume level is reached.
Play/Pause mode
1. To temporary stop music play, press the Play/Pause
will freeze. Press the Play/Pause
button (8) once. The playtime on the LCD display (6)
button (8) again to resume the music play.
8

Publicité

Table des Matières
loading

Table des Matières