Garmin MONTANA 600 Serie Instructions page 4

attaching an aMPS Base Plate to the Mount
The AMPS mount is not included with the rugged mount.
1. Thread the screws
plate (not included).
➍
➊
2. Tighten the nuts
The recommended torque is 15–20 lbf-in (1.7 to 2.25 Nm).
installing Your Montana in the Mount
Before placing the device in the mount, ensure that the metal contacts on the
device and the mount are dry to avoid equipment damage. Use the weather cap to
keep the mount cradle dry.
EN-4
through the washers
➊
➋
to secure the base plate.
➎
notice
, mount , and AMPS mount base
➋ ➌
➌
➍
AMPS Rugged Mount Instructions
➎