Télécharger Imprimer la page

Camtech ZBS-20B Mode D'emploi page 12

Publicité

Les langues disponibles

Les langues disponibles

during operation and surrounding areas may be hot. Please don't touch it.
5. Due to fast freezing, ice cubes may appear "Cloudy". This is trapped air in the water and it will not
affect quality or taste of ice.
6. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
7. This appliance can be used by children aged from 8years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved.
8.Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision
9. WARNING: fill with bottled or good quality tap water only. (Do not fill with fruit juices or other drink
types).
10. WARNING – Keep the air vents on the sides of the machine unblocked at all times.
11. WARNING – Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
12. WARNING – Do not damage the refrigerant circuit.
13. WARNING – Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
Troubleshooting
The compressor works
abnormally with a
Buzzing noise
Conditions for Ice making
Cycle are right but no ice
is made.
It makes ice for first
cycle,after that no ice is
made. Restart it hours
later,the same
Evaporater is freezing,but
no water flows over the
evaporater
Machine keeps
running,but the water is
warmer than the normal
water.
Reasons
The voltage is lower than recommended
Stop the Ice maker and do not restart until the voltage is
Solutions
normal.
3.Refrigerant leaks.
Reasons
4.Compressor is broken
Solutions
call for service
Reasons
Fan motor is not working
Solutions
Replace fan motor
3.Water pump or diffusing pipe is blocked
Reasons
4.Water pump is broken
3.After take off the backcover,find the pump,take off the 3
screws,clean the surface of the hole and shaft,and then
Solutions
assemble it.
4.Replace the pump
Reasons
The magnetic valve is broken.
Solutions
Replace the magnetic valve.

Publicité

loading

Ce manuel est également adapté pour:

Zbs-20