Camtech ZBS-20B Mode D'emploi page 10

It lights up when the ice basket is full
It lights up when the unit is on auto cleaning process.
Operating Instructions
Step 1.
Shaved ice may melt,so it is strongly recommeded to connect the drain pipe at bottom of the unit to pool
Sketch for step 1
Step 2.
Open the lid,take out of the ice basket and fill the water reservoir with water.
Note: Make sure the water is not over the bottom of the ice basket.
If you prefer to fill the water automatically,then insert the water pipe into the socket at back of the unit as
sketch above.
Step 3.
Connect to the power.
Step 4.
Press button to turn unit on. The ice maker begins to work.
Note: For the first three cycles,the ice may be small and irregular in size,or even no ice.
Step 5.
If indicator lights up,please take out the basket,then add water as per step 1，then press
twice to restart the ice maker
Step 6.
If indicator lights up,please take out the ice with the scoop.
Note: When the ice basket is full,it is better to remove the ice immediately
Step 7.
Press button to shave ice.
Sketch for step 2