Chopin MR2L Mode D'emploi page 25

User's manual 
02/2017
MR2L/MR10L
The equipment and its user's guide conform to the EEC directives.
■ Warnings
❏ Use of the equipment for other purposes than those anticipated
by the Tripette & Renaud Chopin is strictly forbidden.
❏ Thoroughly follow the warnings and instructions given both in the
documentation and on the actual equipment.
■ Environment
❏ inside use,
❏ operating temperature: 10°C to 45°C,
❏ hygrometry: 10% to 90%,
❏ power voltage variations not exceeding ±þ10% of the nominal
voltage,
❏ pollution grade (following EN 61010-2): 2,
❏ installation category for transient surges (following EN 61010-2):
II.
■ Characteristics
❏ 230V single-phase 50 or 60 Hz (According to the device
configuration, consult the data plate.)
❏ Power consumption:
❏ Net weight:
❏ Dimensions (mm):
■ Electrical connection
❏ The electrical network must be fitted with a RDC (Residual
Current Device) of sensitivity  30 mA of AC class upstream the
bench.
❏ The 2 Ph + Earth plug can only be plugged into a socket fitted
with a protection conductor.
■ Fuses
Fuse 5 x 20 F 2A 250V
■ Transport
Pack the equipment in its original packaging to fully protect it.
50 W (MR2L) and 62 W (MR10L)
10 kg and 25 kg
L 400 x W 430 x H 250 and
L 450 x P 780 x H 400
GB
25