Evenflo Gold Revolve 360 Mode D'emploi page 80

6. Squeeze handle on LockStrong belt
tensioner until lock indicator turns
RED, then lift up on belt tensioner to
allow access to the belt path.
7. Attach LATCH/UAS Connectors
to vehicle Lower Anchor Bars.
Connectors will make an audible
CLICK when attached. Make sure
they are attached by pulling firmly
on connectors. Do not pull on red
Release Strap.
80
LATCH/UAS (Rear-Facing and Forward-Facing)
Installing LATCH/UAS
CLICK!