Evenflo Gold Revolve 360 Mode D'emploi page 55

Installing and Removing the Seat Shell from the Base
WARNING!
!
Harness Adjustment Strap can interfere with rotation lock. DO NOT allow strap to
get caught between seat and base during installation.
To install the Seat Shell to the Base:
1. Lift the legrest flap and locate the
arrow on the underside of the seat
pad.
2. Align the arrow on the seatpad
with one of the two arrows on the
Base.
3. Install the Seat Shell to the Base.
4. Rotate the seat in either direction
to ensure it is properly installed.
Installing the Seat Shell to the Base
DEATH or SERIOUS INJURY can occur.
or
55