Securing The Log Set - Napoleon NEFI27H-CTC Manuel D'installation Et D'opération

installation
EN
4.3

securing the log set

note:
It is recommended to secure the log set, especially if hard wiring the log set.
1. Place the log set in a position which provides optimum flame performance.
note:
To achieve flame effect, the log set should be set 1" (25mm) away from the rear wall.
2. Secure in place using 2 screws (not supplied), which are suitable for the material that the appliance is being
secured to.
12
W415-1719 / C / 04.07.17