Sunshower DELUXE Guide D'installation page 9

INSTALLATION
GLASS PANEL
INSTALLATION MANUAL DELUXE | PART II | P5043 REV A
INSTRUCTIONS
Connect the connector to the
circuit board and use a suction
cup to place the glass panel in the
frame.
Make sure that the cable runs
inside the unit as far as possible
and does not hang in front of the
lamps when the glass panel is in
the frame.
REQUIRED TOOLS
□ Suction cap
CAUTION:
Never touch the window at
! !
the back of the glass panel.
This can cause stains.
9