Sunshower DELUXE Guide D'installation page 10

INSTALLATION
FINISH INSTALLATION
INSTRUCTIONS
Switch on the circuit or residual
current circuit breaker.
The on/off button on the
Sunshower will flash briefly (do
not touch the on/off button when
it flashes; the Sunshower is
calibrating).
If the power button does not
flash, check that the connector is
correctly fitted.
Check whether the Sunshower
switches on: press the left button
once, the infrared lamps will light
up. Press the middle button once
and the Sunshower will cool for
four minutes.
Check if the UV lamps work: put
on UV glasses and press the right
button once. The UV lamps start
up. Press the middle button once
and the Sunshower will cool for
four minutes.
The Sunshower is ready for use!
10
INSTALLATION MANUAL DELUXE | PART II | P5043 REV A