Haier AS09SH1ERA Manuel page 5

Operation
SMART Operation
(This function is unavailable on
some models)
SMART
One key can give you a comfortable
room!
The air conditioning unit can judge
the indoor temperature and humidity,
and make the adjustment accordingly.
AM
SMART
Press ON/OFF button, unit starts.
Press SMART button"
displayed on the remote controller
and "
display board,unit will run in SMART
mode.
SMART FRESH
SMART Defrost
SMART FAN SPEED
SMART FAN HEALTH
SMART DRY
SMART SOFT
SMART Control temperature
or SMART stops
SMART
Under the cooling, heating and dehumidifying mode,
press the smart key to enter the smart function.
Under the smart running mode, when the air
conditioning is running, it will automatically select
cooling, heating, dehumidifying or blowing mode as
per the setting temperature.
When the smart function is running, press the "cooling"
"heating" or "dehumidifying" key to switch to the other
mode, you will exit from the smart function.
SMART start
SMART
SMART " is
" is displayed on the
COOL,HEAT and DRY Operation
1
2
AM
SMART
Press COOL button"
is displayed on
controller and "
displayed on the display board,
unit will run in COOL mode.
Press HEAT button"
controller and " " is displayed on the display board,
unit will run in HEAT mode.
Press DRY button"
controller and " " is displayed on the display board,
unit will run in DRY mode.
1.In DRY mode, when room temperature becomes lower
o
than temp.setting+2 C,
LOW speed regardless of FAN setting.
2.Remote controller can memorize each operation status.
When starting it next time, just press ON/OFF button
and unit will run in previous status.
Unit start.
Select operation mode.
"
the remote
" is
" is displayed on the remote
" is displayed on the remote
unit will run intermittently ai
3