Configuration And Operation - Tripp-Lite AG-0008 Manuel Du Propriétaire

Features
continued
A

Configuration and Operation

Remote Monitoring and Control
The PDU provides remote monitoring
outlet control B and more via Web browser,
telnet and SNMP-based Network
Management Systems. For more information
about configuration and operation of the
PDU via the PowerAlert Web browser
interface, refer to the SNMPWEBCARD User's
Guide, included on the CD-ROM bundled
with the PDU.
201112142 933151.indb 10
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
and Status LED B
shown in the table below. This port is not compatible with PoE
B
(Power Over Ethernet) applications.
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber
A ,
10
indicate several operating conditions, as
Network Operating Conditions
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
A
B
A
1/24/2012 2:09:59 PM