Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Now that you have successfully connected and installed
your PowerLine Ethernet Adapter, we show you how to
configure your computer correctly and how to check
existing settings.
Windows 98 and Windows Me
•
Open the properties of the LAN connection on the
connected computers by selecting Start > Settings
> Control Panel > Network.
•
Click the entry for the TCP/IP protocol of the
network adapter and on Properties. Enable the
option 'Obtain an IP address automatically'. You
can ignore all other options: they either remain
empty or retain their default settings. Close the
dialogs with OK.
•
If you use a router for Internet access, you will still
need to configure it, because the router dials into
the Internet, not the computer.
Option select the 'Connections' tab and enable the
'Never dial a connection' option. Close the dialogs
with OK.
If you cannot find an entry similar to 'TCP/IP' or
'TCP/IP -> Network Adaptor Name' or 'Internet
Protocol (TCP/IP)', you must install the TCP/IP
protocol. Under Add select 'Protocol' and click
Add again. In the next dialog box under
'Manufacturer'
'Network Protocol' select 'TCP/ IP'.
Settings
>
select
Control/Panel
'Microsoft'
ENGLISH
Under Start
Internet
>
and
under
33
Publicité
Table des Matières
