Connecting A Mobile Device; Method 1. Connecting Via Bluetooth - Samsung HW-Q900T Manuel Complet

Masquer les pouces Voir aussi pour HW-Q900T:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

08 CONNECTING A MOBILE DEVICE

Method 1. Connecting via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically
turns on.
Mobile device
The initial connection
• When connecting to a new Bluetooth device, make sure the device is within 3.28 ft (1 m) distance.
1. Press the
PAIR button on the Soundbar remote control to enter the "BT PAIRING" mode.
(OR)
a. Press the
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if
there is a connect record.
b. When "BT READY" appears, press and hold the
the Soundbar for more than 5 seconds to display "BT PAIRING".
2. On your device, select "[AV] Samsung Soundbar Q900T" from the list that appears.
• When the Soundbar is connected to the Mobile device, [Mobile Device Name] → "BT" appears in
the top display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• After you have connected the Soundbar to your mobile device the first time, use the "BT
READY" mode to reconnect.
If the device fails to connect
• If you have an existing Soundbar (e.g., "[AV] Samsung Soundbar Q900T") in the list of speakers
on the Mobile device, delete it.
• Repeat steps 1 and 2.
Top of the Soundbar
BT PAIRING
(Multi Function) button on the top panel and then select "BT".
(Mic On/Off) button on the top panel of
ENG - 28
5 Sec
OR

Publicité

Chapitres

Table des Matières
loading

Table des Matières