Ellipse Corbeil ERTM180W Guide D'installation Et D'utilisation page 28

4. REVERSING THE DOORS (continued)
TRANSFERING THE DOOR STOP TO THE LEFT
1.
On both the refrigerator and freezer doors, using a Phillips screwdriver, unscrew the door stops on the right side.
2.
Re-install the door stops on the left of each door
TRANFERING THE FREEZER DOOR HANDLE TO THE LEFT
1.
Unscrew on the handle using a 1/8" Allen key and remove handle.
2.
Remove the fasteners from the surface of the freezer door, and cover the new vacant holes with the hole caps from
the opposite side.
3.
Insert the fasteners on the left side using a Phillips screwdriver.
4.
Attach the handle to the freezer door using the mounting screws. Use a 1/8" Allen key to tighten the screws.
NOTE: Do not over-tighten
TRANSFERING THE REFRIGERATOR DOOR HANDLE TO THE LEFT
1.
Unscrew on the handle using a 1/8" Allen Key and remove handle.
2.
Remove the fasteners from the surface of the freezer door, and cover the new vacant holes with the hole caps from
the opposite side.
3.
Insert the fasteners on the left side using a Phillips screwdriver.
4.
Attach the handle to the freezer door using the mounting screws. Use a 1/8" Allen key to tighten the screws.
NOTE: Do not over-tighten
.
.
28