Ellipse Corbeil ERTM180W Guide D'installation Et D'utilisation page 26

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. REVERSING THE DOORS (continued)
REMOVING THE FREEZER DOOR (continued)
4.
Remove the three screws with a 5/16 " socket wrench, then lift the hinge straight up to free the hinge pin from the socket
.
in the top of the door
5. Remove the tape and tilt the door away from the cabinet. Lift it off the center hinge pin.
6. Transfer plastic bushing from right side of the door to the left side.
7. Remove the holes' cover caps on the opposite side of the three hinges.
Top Hinge cover cap
8. Lay aside the door on a non-scratching surface with the inside facing up.
Center hinge cover
caps
26
Bottom hinge
cover caps

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour Ellipse Corbeil ERTM180W

Ce manuel est également adapté pour:

Corbeil ertm180s

Table des Matières