INSTALLATION OF C4PLUS-FX / BT
Notice technique / Technical manual - ENCOD-USB – V1.0
3) Connecting the battery (not supplied)
Battery to be used: 12V, 7Ah (dimensions l x d: 151 x 65 mm)
C4Plus-Fx
1) Unscrew the 2 mounting screws on the battery holder.
2) Position your battery (connectors facing the power supply).
3) Connect your battery to the power supply using the cables supplied with the C4Plus-Fx /
BT (ensure that you connect the "+" on the battery to the "+" on the power supply, and
the same for the "-").
4) Re-attach the holder and check that your battery cannot move.
Mounting screw
Battery holder
Mounting screw
p.38/38