Specific Usage; Marking (Type And Model) - SEKUR C607 Serie Manuel D'utilisation Et D'entretien

C607 TWIN
C607 SELECTA
C607 CL3 (*)
(*) formerly C607 F
EN
The CE marking "CE 0426" on the mask facepiece indicates the notified body carrying out the
production control as provided in art. 11/B of European Directive 89/686/EEC - Italcert - Viale
Sarca, 336 - 20126 Milano - Italy (Notified Body n. 0426).
The instructions for use of filters and respiratory equipment, as well as the safety standards
and regulations issued by the competent authority, must be strictly followed. Respiratory
protective devices must be used by personnel in good health and trained in the use of this
kind of equipment. Users must be beardless and without sideboards or moustaches as these
interfere with the facepiece seal, thus impeding adequate seal tightness on the face. The
users of C607 masks must ensure that the highest concentrations of contaminants in the
atmosphere are not exceeded. The permissible exposure limits are indicated in the manual
containing the instructions for use of filters and self-contained breathing apparatuses used
with the mask. In case of contact with lubricants and oil by-products, solvents, oxidizing
agents, acetates, hydrogen peroxide, acids and strong bases, wash and clean the mask af-
terwards as soon as possible in accordance with paragraph 7.2.
2.1
Specific usage
When the hazards potentially present in the workplace call for respiratory system protection
and use of protective equipment, the compatibility of these devices with the mask must be
carefully tested. These additional protection measures must not jeopardize the full effective-
ness of the respiratory protective equipment.
The hazards potentially present in the workplace can be the following:
-
Liquid or gaseous substances which are harmful in contact with skin
-
Toxic substances which are irritating to skin
-
Radiations
-
Mechanical stress
-
Explosions in the atmosphere
-
Oxygen-enriched atmosphere
D.P.I. s.r.l. technical services are at your disposal for any assistance, explanation, advice or
information you might need.
3.
Marking (Type and model)
C607 masks are CE marked as provide in the European Directive 89/686/EEC and subsequent
amendments since the tested samples met the requirements of EN 136:98. In addition to
this Norm, the masks of the C607 SP/A ESA also comply with DIN 58600 for quick connection.
The different models of mask can be easily identified by the following identification marks.
(4333.0608)
(4333.2030)
(4333.2035)
20