Publicité
Les langues disponibles
Les langues disponibles
Linking Instructions
With power disconnected each additional fixture (not included) should be mounted in the
same way as the first installed fixture. Make sure that the distance between fixtures does
not exceed the connector cord length of 18".
1
Fig. 1
2
3
Fig. 3
Troubleshooting Guide
Minor problems often can be fixed without the help of an electrician. Before doing any work
on the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
Problem
Fixture doesn't light.
Fuse blows or circuit breaker
trips when light is turned on.
Care and Maintenance
IMPORTANT: This light fixture uses light emitting diodes (LEDs) to provide
light. LEDs do not have a filament to burn out like a traditional light bulb.
LEDs gradually emit less light over their lifetime, but will typically last 36,000
hours in a residential environment.
Periodically clean the fixture and diffuser using a mild, non-abrasive cleaner
and soft cloth. When cleaning the fixture, make sure the power is turned off.
Do not spray cleaner directly onto any part of the fixture or LEDs.
Need Help?
In the event you are missing a part or have questions regarding installation
please visit our website at
call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
The manufacturer warrants this lighting fixture to be free from defects in materials and
workmanship for a period of (6) years from the date of original purchase by the
consumer. The fixture is not warrantied for use in a commercial or retail application.
The warranty is limited to use in a residential environment. We will repair or replace (at
our option) the unit in the original color and style if available, or in a similar color and
style if the original item has been discontinued, without charge. Defective units must be
properly packed and returned to the manufacturer with a letter of explanation and your
original purchase receipt showing date of purchase. Call 1-800-291-8838 to obtain a
return authorization number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any
case limited to replacement of the defective light fixture product. The manufacturer will
not be liable for any other loss, damage, labor costs or injury which is caused by the
product. This limitation upon the liability of the manufacturer includes any loss,
damage, labor costs or injury which is (I) to person or property or otherwise; (II)
incidental or consequential in nature; (III) based upon theories of warranty, contract,
negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the
sale, use, or repair of the product. This warranty gives you specific rights, and you may
also have other rights which vary from state to state.
Ecolight™ 5260 Capitol Drive, Wheeling, IL 60090
Using a flathead screwdriver, carefully pry off the plastic
cap that covers the power port on the fixture (Fig. 1).
NOTE: The linking cord is fitted with a distinct cord
Fig. 2
connector plug at each end and will only connect one way.
Try inserting one end of the linking cord into the power port,
if that fails try the other end of the linking cord (Fig. 2). DO
NOT try to force the plug into the port. When correctly
inserted the catch on the top of the cord connector plug will
click into the power port.
Link additional fixtures by following the linking instructions
outlined in steps 1 and 2 (Fig. 3). Once all fixtures have been
linked, insert the power cord connector plug into the power
port on the end of the last fixture and the grounded plug into
the outlet. NOTE: Each light can be individually operated by
the on/off switch located on each fixture.
Cause
Power is off.
Bad connection.
Bad switch.
Discontinue use.
www.goodearthlighting.com/support
Ecolight™ Warranty
6 YEAR LIMITED WARRANTY
- 3 -
Solution
Check if power supply is on.
Check cords and/or wiring.
Test or replace switch.
Call customer service.
or
Printed in China
Publicité
