Parameters - Bodet Time Style 5S Notice D'installation Et De Mise En Service

5.4 Parameters

This page is used to configure the clock display on the network.
The following information is displayed:
• Luminosity: Used to set clock brightness between 4 levels from 1 (low) to 4 (high).
Default brightness is 3.
• Mode 12H/24H: Used to display the time in 12- hour or 24-hour mode.
Example: 8:00 (in 12-hour mode) or 20:00 (in 24-hour mode).
• Eco Mode: Used to enable the clock's energy-saving mode. In Eco mode, the clock
displays the flashing colon and is set to minimum brightness (level 1). This mode is set for
a period configured below (ON & OFF Time). This mode is disabled if the user opens the
configuration menu (using the "S" and "+" keys) or changes the settings on the web server
or if the clock is rebooted.
• ON & OFF Time: Used to define the period when Eco mode is enabled. This mode is only
enabled when the status changes. Example: if Eco mode is set at 8:30 for 8:00 (day D),
the clock switches to this mode at 8:00 on the following day (D+1).
• Alternate Display: Used to select which information is displayed in alternation with the time
display. Time display can alternate with week number, date + month or the month + date.
is used to save any settings made on this page.
14
EN