Philips AZT9230 Mode D'emploi page 27

If a fault occurs, first check the points listed, before taking the set for repair.
If you are unable to solve a problem by following these hints, consult your dealer or
service centre.
Problem
No sound or
bad sound quality
Poor radio reception Weak radio signal
Alarm does
not work.
Malfunction, loss of Continued operation with weak Change batteries, readjust
time settings
Possible cause
PAUSE is activated.
Loose, wrong or dirty
connections
Volume is not adjusted.
Malfunctions due to vicinity
of active mobile phones
Strong magnetic fields near
the player
In-car use
cassette adapter is
inserted incorrectly.
Temperature inside the car
is too high/low.
Cigarette lighter socket
is dirty.
Wrong playback direction of the Change the autoreverse
car cassette player's
autoreverse feature
Interference caused by electric
equipment like TVs, computers, electric equipment.
engines etc.
Alarm time is not set/alarm is
not activated.
batteries
TROUBLESHOOTING
Solution
Press 2;.
Check and clean
connections.
Adjust the volume.
Keep the player away from
active mobile phones.
Change the player's position
or connections.
Insert the cassette adapter
correctly.
Let the player adjust to the
temperature.
Clean the cigarette
lighter socket.
direction.
Direct the antenna for
optimum reception.
Keep the player away from
Set the alarm time/activate
the alarm.
settings.
27