Philips AZT9230 Mode D'emploi page 23

Alarm time setting
Provided the current time has been set, your player can
be used as an alarm clock.
1 Keep SET· pressed for approximately 2 seconds,
then briefly press SET· again.
AL is displayed and the alarm clock
y
digits 00:00 flash.
2 Press 3 or 4 repeatedly within 5 seconds to set the
alarm time.
is shown and the alarm time is displayed.
y
3 Press SET· twice or do not press any key for
5 seconds.
The alarm time is set and the alarm display
y
goes off.
• To switch to the alarm clock display during CD or
tuner play, press CLOCK twice.
is shown and the alarm time is displayed
y
for 5 seconds.
ALARM CLOCK
23