Philips AZT9230 Mode D'emploi page 24

ALARM CLOCK
Alarm activation/deactivation
At the set alarm time either the tuner will start playing for 1 hour, the beeper will
come on for 3 minutes or an entire CD will be played.
1 Keep SET· pressed for approximately 2 seconds, then
briefly press SET· twice.
Either ALbEEP, ALCd or ALtun is displayed.
y
2 Press 3 or 4 if necessary repeatedly within
5 seconds to select the desired alarm signal until the
display shows either:
ALbEEP: the beeper will be the alarm signal,
ALCd: the CD will be the alarm signal, or
ALtun: the tuner will be the alarm signal.
At the set time
y
selected alarm signal will come on.
• You can deactivate the beeper for 24 hours by
pressing any key on the player.
• If you deactivate the alarm function by switching CD or
tuner play off with 9, CD or tuner play will restart
after 24 hours.
• To switch the alarm function on or off,
keep ESP pressed for approximately 2 seconds.
is shown if the alarm function is on.
y
Notes: – If there is no CD inserted or no radio station tuned,
the beeper will be taken as the alarm signal instead.
– The alarm can only be heard if you disconnect the
headphones, and either connect speakers to the player,
or select the beeper as the alarm signal.
24
starts flashing and the