Use only powder provided by Hu-Friedy & EMS and corresponding to the application.
Close correctly the bottle after use. The conditions of storage are described in the chapters "Storing
the product" and "Technical data".
refer to the information provided in the chapter "Maintenance".
Clean the threads of the powder chamber and of the cap before screwing them on.
Ensure that the powder chambers are closed tight. Otherwise air and powder could leak.
Please contact your local retailer in order to verify if the EMS & Hu-Friedy AIR-FLOW PLUS Powder
is available in your country.
The powder should not remain over a determined time inside the powder chamber. Read the
instructions delivered with the powders.
30