DeWalt DW263 Traduction De La Notice D'instructions Originale page 21

connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) Power tool use and care
a ) Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which it
was designed.
b ) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c ) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d ) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
5) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Additional Specific Safety Rules for
Screwdrivers
• Hold power tool by insulated gripping surface, when
performing an operation where the fastener may
contact hidden wiring or its own cord (bolt). Fasteners
contacting a "live" wire may make exposed metal parts of the
power "live" and could give the operator an electric shock.

WARNING: We recommend the use of a residual current
device with a residual current rating of 30mA or less.
Residual Risks
In spite of the application of the relevant safety regulations
and the implementation of safety devices, certain residual risks
cannot be avoided. These are:
• Impairment of hearing.
• Risk of personal injury due flying particles.
• Risk of burns due to accessories becoming hot during
operation.
• Risk of personal injury due to prolonged use.
• Risk of squeezing fingers when changing the accessory.
• Health hazards caused by breathing dust developed when
working in concrete and/or masonry.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Date Code Position (Fig. A1)
The date code 13 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Pistol grip screwdriver DW263/DW264
or
1 Universal screwdriver DW268/DW269
or
1 Drywall screwdriver DW274/DW274KN/DW275/DW275KN
1 Kitbox (K-models only)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Description (Fig. A1, A2)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Variable speed switch
1
Lock-on button
2
Forward/reverse slider
3
Depth adjustment collar (DW263/DW264/DW274/
4
DW274KN/DW275/DW275KN)
Versa Clutch® (DW268/DW269)
Depth locator (DW263/DW264/DW274/DW274KN/DW275/
5
DW275KN)
Belt clip
6
Ball retainer (DW268/DW269)
7
Intended Use
Your DW263/DW264 screwdriver has been designed for
professional screwdriving applications and for use as a nutsetter.
Your DW268/DW269 universal screwdriver has been designed
for professional screwdriving applications.
Your DW274/DW274KN/DW275/DW275KN drywall screwdriver
has been designed for driving drywall fasteners through drywall
board into timber or metal framing studs.
EngLIsh
19