FP PostBase Guide D'utilisation page 38

38 PostBase Mailing System
4.7 Test print
Using a test print, you can assess the settings for the franking imprint as well as the
print quality.
All manuals and user guides at all-guides.com
According to postal regulations, test prints
are marked as such. Never post test imprints.
Test prints are not logged in the postage
registers.
Setting a test imprint
The way you set the test print may differ from
the approach described here, depending on
requirements by the respective postal
service. In that case, please refer to the
country-specific addendum to the Operator
Manual.
• Set the desired parameters for the franking
imprint (advert, SMS text etc.).
• Press the P
screen.
• Set the desired product.
Once all necessary mailing data are set, you
can perform a test print. The T
PRODUCT
additional services list.
• Choose T
PostBase prompts you to position a letter.
button in the Home
RODUCT
EST PRINT
option is shown at the end of the
EST PRINT PRODUCT
.