Rointe D Serie Manuel D'installation Et D'utilisation page 45

EN
D SERIES DIGITAL RADIATOR WITH WI-FI
• Start programming for AUTOMATIC function
To program the AUTOMATIC mode, see points above and ensure that START
PROGRAMMING is highlighted. Press the button to access and the display
panel will show a flashing screen.
STEP 1 - Select COMFORT mode temperature
COMFORT mode will be programmed first. Select the COMFORT mode
temperature between 19ºC and 30ºC using the and buttons. The icon
and the temperature will flash. Press the button to confirm.
STEP 2 - Select ECO mode temperature
ECO mode will be programmed next. Select the ECO mode temperature between
7.5ºC and 18.5ºC using the and buttons. The icon and the temperature
will flash. Press the button to confirm.
STEP 3 - Select the Days
The days of the week will start flashing on the display panel and show as DAY 1,
DAY 2, DAY 3 etc.
Use the and buttons to move forwards or backwards through the days.
Press to select the day or days that you wish to include in your AUTOMATIC
program. The day will stop flashing once selected. Repeat for all the days you wish
to program and once all days are selected press the button to move onto
setting the hour.
STEP 4 - Select the Hours
Once step 3 has been completed, 0h appears on the display panel. 0h is equal to
midnight. Use the or buttons to select the hour you wish to change. Use
the button to change the mode (COMFORT, ECO or nothing) for the hour you
wish to modify. The corresponding icon for that mode will appear at the top of the
screen. To finish the programming press or leave for 30 seconds without
pressing any buttons. To change the programming go back to step 1 and proceed
as described before.
*If you wish to have individual days with different programming within your program
you will need to modify each day separately, starting from the Main Menu again
for each day/days. Follow Steps 1 to 4 above to program multiple differing days/
hours/temperatures.
If you wish to activate the anti-frost mode in the hours that do not have COMFORT
or ECO mode, from the main screen of the radiator and in automatic mode, press
the key . If you want to reverse this action, press .
45