Rointe D Serie Manuel D'installation Et D'utilisation page 35

WARNING: The weight of some of the products may be heavy. The installation
may require two people.
IMPORTANT: Please follow these instructions carefully.
D SERIES DIGITAL RADIATOR WITH WI-FI
1. Remove the packaging and check that the installation
contains brackets, screws, rawl plugs and a cardboard
template.
2. Select a suitable location on the wall. Place the
template on the wall and mark the holes for the
brackets and screws. Observe the minimum distance
requirements from the previous page.
Use the floor as a base for the template, not the
skirting board.
3. Remove the template and carefully drill out the
marked holes.
4. Secure the upper brackets with the rawl plugs
and screws provided. Then fix the lower bracket. To
distinguish it, the lower bracket has a different design
from the top ones.
5. Slide the product up and down over the fixed
brackets.
6. Check the straightness with a spirit level and adjust
the supports accordingly if necessary.
EN
Bottom bracket
Top bracket
35