Main Menu: Energy Sub-Menu - Rointe D Serie Manuel D'installation Et D'utilisation

• Open WINDOWS function
This option allows you to activate or deactivate the OPEN WINDOWS function. Use
the and buttons
the desired option has been selected, press
• Rointe Eye Detect function
Allows you to enable or disable the Rointe Eye Detect function. Using the
buttons select ON to activate or OFF to disable. Once the desired option is
selected press
• Efective Power function
To check the Power status of your product, make sure the icon
is flashing in the 'Energy' submenu and press the button
to access. This option shows on the display the actual consumption
time of the product and the total time during which our product is
connected to the mains. After a few seconds without pressing any
button, the display will show the nominal power and the effective
power of the product. The effective power corresponds to the
average power value that our product actually consumes during
operation.
• Information
This function will display the software version, the date of this release and the
rated power of the product.
To access this information, ensure the
menu and press the
display panel. To exit press the
onto the next display in the Information function.
Pressing , the screen displays the Wi-Fi connection status, connection type,
IP address, subnet mask and gateway. To exit press the
to the next screen in the information function.
42
and , to select ON to activate and OFF to deactivate. Once
to confirm and return to the main display.
button to confirm. The information will then show in the
button or press the
to confirm and exit.
icon is highlighted in the 'Energy' sub-
button again to move
or press
and
WIFI STATUS
dhcp:assigned
IP, NM, GW:
to return
xxx.xxx.x.xxx
xxx.xxx.xxx.x
xxx.xxx.x.xxx