Remarks - Duratech VISION Adagio Pro Mode D'emploi

Remarks

Water conditions
Prevent damage to your pool lamps and wires due to unstable water conditions.
Your local government may have enacted guidelines for your pool water conditions to apply
by. If not we strongly advise the following parameter specifications to be applied:
pH level
Free Chlorine
Combined chlorine
Water temperature
Always adhere to the instructions provided by your chemical brand/supplier for the correct
use and application of pool chemicals.
Salt water pools, or pools fitted with a salt water chlorine generator contain salt in the pool
water. Salt is a corrosive material. Overdosage and/or consistent levels of salt increase the
possibility of deterioration of your pool lamps and cables. As a rule of thumb, a concentration
of 35gr/l salt can be accepted when pH values are between 7,2-7,4.
In any case, we urge proper use, care and maintenance of your installation, in order to mini-
mize the effect of corrosion and deterioration.
Please be aware that pool lamps and cables with defects caused due to abnormalities in the
water condition are not covered by our factory warranty.
6,8 - 7,6
max. 3ppm
max. 1 ppm
max +40°C and lamps need to be kept out of ice zones
5