Wiring Remarks - Duratech VISION Adagio Pro Mode D'emploi

Wiring remarks

For installations with DURALINK* products
1. Third party equipment such as frequency inverters and electric motors can generate
excessive noise on the 230VAC / 400VAC power line.
This noise might be injected into the adjacent 12VAC power line and disturb the
power line communication towards the Adagio
Keep 230VAC / 400VAC power line cables at least 50cm separated over their
!
full length from the 12VAC power line towards any RGB lights
Do not mix 12VAC and 230VAC / 400VAC power line cables into the same
!
cable trays
2. Floating cores in a multi-core cable are not allowed because it disturbs PLC
communication.
We recommend using 2 CORE cables for all Adagio Pro lights to avoid PLC
!
communication issues
(*) PLP-REM, PLP-REM-300/350, LinkTouch, DLM-450, DLM-600
14
RGB lights.
Pro