Synchronizing & Color Changing - Duratech VISION Adagio Pro Mode D'emploi

Synchronizing & color changing (for RGB and TW lamps only)
Manual synchronization
1. Switch ON the 12 VAC line voltage and make sure that all lamps light up.
2. Switch OFF the 12 VAC line voltage and wait for at least 20 sec.
3. Switch ON and switch OFF
4. Switch ON and switch OFF
5. Switch ON
6. The lamps should now all be on color program 1
for RGB lamps: fixed blue light (Deep blue Sea)
for TW lamps: 3200K
Changing colors
Quickly turn the lamps OFF and back ON
The lamp will jump to the next color program ( 1 --> 14 )
Memorizing the last color
Turn the lamp OFF for MINIMUM 20 seconds
The last chosen color has now been memorized
The use of PLP-REM, PLP-REM-350, LinkTouch, DLM-450 & DLM-600 control units enables
extended features like automatic synchronisation, dimming and DMX / RS485 control
18