First Use - IKEA FRYSA Mode D'emploi

ENGLISH
The intermediate position is usually the most
suitable.
However, the exact setting should be chos-
en keeping in mind that the temperature in-
side the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Fast Freezing Function
To freeze fresh foods, you will need to acti-
vate the Fast Freezing function.
Press Function button (several times if nec-
essary) until the corresponding icon ap-
pears.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing Function button (refer
to "Functions Menu").
High temperature alarm
An increase in the temperature in the freez-
er compartment (for example due to a
power failure) is indicated by:
• flashing temperature
• red illumination of display
• sounding of buzzer

First use

Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accesso-
ries with lukewarm water and some neutral
soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
• the display illumination remains red.
When you press Function button to deacti-
vate the alarm, the highest temperature
reached in the compartment appears on in-
dicator for some seconds.
At this point the flashing stops and the dis-
play illumination changes over from red to
white.
Door open alarm
An acoustic alarm will sound when the door
is left open for more than 1 minute.
The door open alarm conditions are indica-
ted by:
• flashing Door open alarm indicator
• red display illumination
• beeping sound.
Press the Function button to deactivate the
acoustic alarm.
When normal conditions are restored (door
closed), the acoustic alarm will stop.
Important! Do not use detergents or abra-
sive powders, as these will damage the fin-
ish.
9