GIA giatsu PREMIUM R32 Manuel De L'utilisateur Et D'installation page 49

Installation Instructions
Dimension Requirements on the Installation Space of the Indoor Unit
Installation of the Indoor Unit
a. Requirements on the Installation Location
1. Ensure the hanger is strong enough to withstand the weight of the unit.
2. The drainage of the drain pipe is easy.
3. No obstacle is in the inlet/outlet and the air circulation in good condition.
4. Ensure the installation space shown in Fig.3 is left for the access to maintenance.
5. It should be far away from where there is heat source, leakage of inflammable, explosive
substances, or smog.
6. It is the ceiling type unit(concealed in the ceiling)
7. The power cords and connection lines of the indoor and outdoor units must be at least 1m
away from the TV set or radio to avoid the image interference and noise (even if 1m is
kept, the noise may be produce due to the strong electric wave)
b. Installation of the indoor unit
1. Drilling Holes for Bolts and Installing the Bolts
Using the installation template, drill holes for bolts (four holes). (Fig.4)
Fig.3
Fig.4
Drilling position for bolts
13