GIA giatsu IX43 R32 Manuel De L'utilisateur page 26

Manual Operations
This display panel on the indoor unit can be used to operate the unit in case the remote control has
been misplaced or is out of batteries.
Operation indicator
MANUAL button: This button selects the mode in the following order: AUTO, FORCED COOL, OFF.
•
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The system will then
•
turn to AUTO after it has cooled with a high wind speed for 30 minutes. The remote control will
be disabled during this operation.
OFF mode: When the panel is turned OFF, the unit turns o and the remote control is re-enabled.
•
 
Page 8
Manual button
Timer indicator
LED display
Infrared receiver
Alarm indicator
PRE-DEF
(pre-heating/defrost)
indicator
Fig. 3.1
3