Kemper MaxiFil Clean Notice D'utilisation page 69

6. Close the dust collection cartridge (item 2) with the sealing plug (item 1)
and dispose of it in accordance with the applicable regulations.
7. Remove the sealing plug (item 1) from the new dust collection cartridge
(item 2) and insert it into the holder provided on the product.
8. Now insert the new dust collection cartridge (item 2) into the product
holder in reverse order. When doing this, the dust collection cartridge
(item 2) should be turned slightly when it is placed on the filler level so
that the seal seals evenly against the filler neck.
1502827-03
Fig. 17: Closing the dust collection cartridge
Fig. 18: Inserting the dust collection cartridge
- 69 -
EN