General Instructions; Dimensions Mm - Lamborghini Caloreclima BIA 30-90 Manuel D'utilisation Et D'entretien

GENERAL INSTRUCTIONS

The BIA boiler is a highly efficient gas or oil fired heat generator that meets all domestic heating and hot water
requirements.
The boiler shell is made of cast iron and is assembled with boiler studs and bicones. The fins are distributed in
such a way as to assure high heating performance with consequent fuel conservation.
The final aesthetic image and total insulation are guaranteed by the elegant control panel, the pressure assembled
enamelled chassis, and a thick layer of glass wool lagging which reduces to a minimum heat loss into the
environment.
It is recommended to use Lamborghini burners and respect boiler technical characteristics (see page 21).

DIMENSIONS mm.

a1 1" Ø heating flow tapping
1" Ø heating return tapping
a2
3/4" Ø hot water outlet
a3
a4 3/4" Ø cold water inlet
3/4" Ø re-circulation
a5
1/2" Ø water heater safety valve connection (if present)
a6
a7 3/4" Ø gas connection
3/8" Ø light oil connection
a8
Burner intake
a9
BIA 30-90
19