Technical Information - IntesisHome MH-RC-WIFI-1 Guide D'utilisation

IntesisHome MH-RC-WIFI-1
®
3. Antenna location
Locating the external antenna in a proper location and position will improve communication between the
IntesisHome device and your Wi-Fi Router or Access Point (AP).
Important: Avoid placing
the antenna next to metal
surfaces.
Fix the external antenna preferably as close as possible from the Wi-Fi signal source (Access Point
or Router).
Please, make sure that you place the antenna in a vertical position and pointing directly to your Wi-Fi
Router or Access Point (AP).
See www.intesishome.com/docs/MH-RC-WIFI-1-Install_sketch.pdf for more information.
Antenna
Antenna in vertical position and pointing to
the Wi-Fi Access Point or Router
If you have coverage problems after installation, please visit the connectivity support section
in our site at www.intesishome.com/support/faq/

4. Technical information

In order to obtain a complete and technical description of the device, please see the document at www.
intesishome.com/docs/MH-RC-WIFI-1-Technical-Info-eng.pdf
5. FAQ and support
For any question or problem related with the product or the installation procedure, please visit our support
center at www.intesishome.com/support .
Please refer to the website www.intesishome.com/downloads for latest updates.
6
Important: When possible, try to check Wi-Fi coverage
in the installation location. Good Wi-Fi level is strongly
recommended.
Antenna
Antenna in horizontal position and not
pointing to the Wi-Fi Access Point or Router
INSTALLATION GUIDE