Mesureur de Dioxyde de Carbone (CO
)
2
When you have the Carbon Dioxide (CO
) Meter connceted to PC, select " DataLogger " from
2
main menu or click Datalogger icon from tool bar to load recorded data from the meter and there
will be a progress indicator to show the loading status. If error occurs, just click " DataLogger
icon
" again.
After the data was downloaded, the left hand side will show how many data sets were loaded
and detail information for each data set (start data, start time, recording rate and record
numbers).
for examples:
It will generate the first data set to graph on the right hand side. The user can also click at any
other data set for graph.
Graph:
16