SEFRAM SE-513 Manuel D'utilisation page 35

11.4 Tutorial - Quick Start to Use SE513:
Recording real time data in waveform:
(1) Power on the NDIR CO
a PC USB port with the cable.
(2) Start SE513 program.
(3) If the connection is successful, the panel will display
the same value as NDIR CO
meter with PC, it will display "
panel window in SE513.
(4) Select sampling rate from Real-Time Graph window.
(5) When the connection is successful, click " Real Time | run " or
recording real time data and there will be a waveform on the Real Time Graph Window.
(6) Click " Real Time | Stop " or
11.5 How to save the recorded real time data to a file?
(1) Click the graph window you want to save and the graph window will become active, then
choose File | Save from main menu or click from the tool bar.
an active window
(2) There will be a save dialog window for you to choose the file name and file type to save. There
are three types of file format you can choose, binary file(*.ghf), text file(*.txt) and EXCEL format
file(*.csv). The *.ghf file use much fewer disk space to save the data than the other two file formats,
but it can only be used in SE513. Text file can be opened by SE513 and any other word processor
program like word, notepad etc. EXCEL format file can be opened by SE513 and Microsoft
EXCEL.
Note: If decimal separator is comma in your country, this file format will be disabled,
Meter first and connect it to
2
Meter. If fail to connect the
2
No Connection
" on the
to stop recording.
13
Mesureur de Dioxyde de Carbone (CO
from main menu to start
not active window
)
2