Battery Replacement; Maintenance; Se-513 Software - SEFRAM SE-513 Manuel D'utilisation

9.1 Battery Replacement:

(1) When the battery voltage
drops below proper operation
range, the
blink on the LCD display and the
battery needs to be replaced.
(2) Before replacing the battery,
power off the meter.
Open the cover of the battery
cabinet. Replace the old batteries
with new 9V Alkaline
(Carbon-zinc batteries are not
recommended).
(3) Close the battery cabinet
cover.

10. MAINTENANCE

In order to ensure the accuracy of the NDIR CO
calibrate it once a year.
Clean the device and the window of the display with a clean, lint-free, antistatic and dry cleaning
cloth.
Do no use cleaning agents that contain carbon or benzenes, alcohol or anything
similar to clean the product since these substances damage the surface of the
measuring instrument. Moreover, these fumes are hazardous to health and explosive.
Do not use tools with sharp edges, screwdrivers, metal brushes or anything similar to
clean the device.

11. SE-513 SOFTWARE

11.1 The SE-513 package contains:
⚫ Software CD disk.
⚫ Micro USB cable.
11.2 System Required:
Windows 7/ Windows 8/ Windows 10
11.4 Minimum Hardware Required:
⚫ PC or laptop with CD-ROM drive.
⚫ At least 50 MB hard disk space available to install SE513.
⚫ Recommended screen resolution 1024X768 or above.
symbol will
battery
Mesureur de Dioxyde de Carbone (CO
Meter for a longer period of time you should
2
12
)
2