Installing Worktop - NewAge Products Pro 3.0 Serie Mode D'emploi

Installing Worktop

Side Support Bracket
Parts Needed.
1x Support
Bracket
4 X Washer
(1/4")
2
Align bracket.
Level bracket and ensure it is at the
5
same height as the base cabinet.
2 X Hex Bolt
(1/4" x 5/8")
2 X Lock Nut
(1/4")
Note:
1
Open locker and locate holes on either side.
3
Fasten nuts, bolts, and lock washers.
4
Tighten nuts & bolts.
Support bracket included with locker.
X2
19