To Wall - NewAge Products Pro 3.0 Serie Mode D'emploi

Securing Cabinets to Wall
Note: Wall brackets are not designed to support the weight of a loaded cabinet.
Cabinets must be secured to the wall using supplied 1/4" x 2.5" lag screws.
Use stud finder to locate the studs
1
and mark the wall with a pencil.
Place cabinet tight
3
against the wall.
Drill 4 wall screws and washers
6
through perforated holes into studs.
2
Wall & Locker: 4 wall screws and 4 washers
Corner Wall: 6 wall screws and 6 washers
Base & Tool Cabinet: 2 wall Screws and 2 washers
Align cabinet
4
to stud marks.
X4
Note:
Do not load cabinet
without first securing to
the wall.
Gather parts.
Wall Screw
(1/4" x 2.5")
5
Level cabinet
Masonry.
• Follow steps 3 to 5.
• Drill 4 pilot holes through the
perforated strip with hammer drill &
masonry bit.
• Use 4 x ( 2 ¼" x ¼" )Tapcon Concrete
Anchor into wall. (Not Included)
• OR 4 x (#10 x 2" )Screw with 3/16"
masonry plug into wall. (Not Included)
• Follow Step 6.
Wall Washer
(1/4")
15