Installing Casters - NewAge Products Bold 3.0 Serie Mode D'emploi

Installing Casters

Parts Needed.
16 X Hex Bolt
(1/4" x 5/8")
16 X Washer
(1/4")
Flip cabinet upside down,
2
locate holes forming a square.
4
Repeat steps 3 for each corner.
6
4in Casters
16 X Spring
(1/4")
www.newageproducts.com
Note: Locking casters should be installed
on same end as side handle.
Open cabinet, remove any shelves or
1
loose items. Close and lock doors and
drawers.
Align caster holes and bolts to cabinet
3
using 4 Hex bolts, 4 spring washers and
4 (1/4") washers per caster.
Bolt
Spring Washer
Flat Washer
5
Return cabinet to upright position.