Wilo Star-Z NOVA Notice De Montage Et De Mise En Service page 32

Programming:
Installation and operating instructions Wilo-Star-Z NOVA
1. Press "PROG" button once, the display will
now show "ON 1" mode.
2. Press "WEEK", "HOUR", "MINUTE" respe-
ctively to set the days, hour and minute you
required. Each push of the "WEEK" button will
cycle through the following options:
MO TU WE
3. Once the "ON" time is set, press "PROG" but-
ton once. The display will now show "OFF 1".
4. If you wish to clear a programme setting, push
the "R/RECALL" button. Pushing the "R/
RECALL'' button again will reinstate the set-
ting. Only the displayed setting will be
affected.
5. Repeat the step 1 to 3 for ON2/OFF2, ... ,
ON20/OFF20.
Note: No operation about 20 seconds,
it will get back to the real-time display auto-
matically.
Installation
TH FR SA SU
31